Product Features
– Can be used for lling lightweight wall panel, Acotec wall.
– Good adhesion, enhance strength on the lightweight wall panel.
– Low shrinkage, reduce the cracking problem.
– Good workability and water rentention.
– Color : Grey powder
Application Instruction
Mix Filler Mortar with water. Stir with slow speed electric mixer (< 150 rpm) till homogeneous.
Leave for cure 5 minutes and stir second time. Do not add more water / Filler Mortar after allow curing.
For gap filling
Damp the surface by water. Laying by place a layer of Filler Mortar by trowel in the gaps between Acotec panels and floor. Smooth the surface and remove excess by trowel.
Clean tools after use with clean water.
| Test | Requirement | Result |
| Consistency | 175 – 195 mm | Pass |
| Consistency retention | ≥ 75 % | Pass |
| Time of initial setting | ≥ 150 mins | Pass |
| Compressive strength after 28 days | ≥ 10 MPa | Pass |
| Adhesive strength after 28 days | ≥ 0.5 MPa | Pass |
| Maximum particle size of aggregates | ≤ 1.25 mm | Pass |
| Bucket life | ≥ 1.5 hr |
Caution
– Recommend to use rubber gloves, dust protection masks, eye safety goggles and personal safety equipment.
– Apply in good ventilation area. Do not inhale products.
– In case of any spill on eyes, rinse immediately with clean water and seek medical advice.
– Keep away from children
Suggestion
– Damp the surface by water before apply adhesive mortar, to reduce water absorption of material cause cracking problem.
– Any sand, dust or small gravel on the substrate must be removed from the surface before apply.
– Do not use product on hot surface or contact to direct sunlight. Substrate needs to reduce the temperature by water before apply the products.
– Age of product is 1 year.
Packing
Net weight : 25 kg/bag
Reviews
There are no reviews yet.