Dingo Flex 2K

PRODUCT FEATURES

• Highly flexible
• Optimized for flexible surface
• Can cover with tiling
• Powerful water pressure resistance

APPLICATION

• Waterproofing and protection a water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools.
• Tile fixing and waterproofing of bathrooms, Kitchens and other wet room, suitable for exterior & interior applications.
• Waterproofing of terraces and balconies under the pavement.
• Internal and external waterproofing and protection of new and old buildings, facades against dampness, rain.

APPLICATION INSTRUCTION

Substrate preparation

Dry or moist substrates must be cleaned, load bearing, fine porous and fairly even. If necessary, roughen surface with appropriate device (e.g. abrasive blasting, brush hammering). Any damage should be repaired in advance. The concrete surface must be damp.

Mixing

Cement 4 kg : Resin 1 liter or Cement 2.9 parts : Resin 1 part (by volume).

Application

• Mix Crocodile Flex 2K part A (Cement) with part B (Resin)
• Apply with brush. The second coat should be applied, allowing 1 – 2 hours apart between each application.
• Prepare only as much as can be applied within 1 hour period. Do not add resin or water.
• Tile work should be done on surface after 3 days.
• Tanks and swimming pools should be filled after 7 days drying time.

Curing

Depend on temperature and relative humidity conditions on site. Normally will require a minimum of 7 – 14 days depending on ventilation. Ensure that the product has cured enough to be in permanent contact with water.

Estimated Coverage

2-2.5 kg/sq.m per coating 2 times.

Caution

• Do not left expose.
• Cement may cause injury to skin or eyes.
• Use of rubber gloves, dust masks, eye protection, and other safety equipment is recommended.
• If contact with eyes occurs, flush immediately and repeatedly with water, and then contact doctor immediately.
• Avoid contact with skin. Wash thoroughly after handling.
• Keep out of reach of children

Storage

It should be kept in a dry place and the temperature is not too high to avoid product’s degradation. Age of product is 1 year.

Packing

Net weight: 25 kg per set (cement 20 kg resin 5 liters)